Description
MXG 1.3 TFT Dash Logger - XA4MXG12A400
Aim MXG 1.3 is the new dash logger designed to acquire and display data coming from your engine ECU, the internal accelerometer, gyro, and from the GPS Module included in the kit. Analog/digital inputs and predefined math channels.
Performance and data acquired can also be incremented adding up to eight expansion modules.
The only difference between the MXS and MXG is the MXS is a compact 5″ display and Aim MXG 1.3 is a 7″ display, a better fit for wide cockpit installations.
Watch your data in pre-configured pages
MXG 1.3 features freely configurable pages show, together with RPM scale, all the data you need, like speed, water temperature and oil pressure, laptimes and much more... You can choose the custom pages you wish among a wide library of page styles, defining which data to be shown, their end of scale and measure units. Swapping between pages is quite easy using the push buttons.
High Contrast TFT Display
MXG 1.3 features a high contrast 7" TFT display: its visual quality is always optimal as its ambient light sensor keeps the backlight at the best brightness levels.
Flexible Alarms
MXG 1.3 features six configurable RGB alarm LEDs: you choose the conditions, you choose the colors. Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities.
Dual Digital Outputs
MXG 1.3 features two digital outputs. The two digital outputs (Dout) are LOW SIDE type (switch to ground): they can be configured in order to be turned on/off depending on the value of the analog or digital inputs. They permit to automatically run external systems, i.e. to switch on/off additional lights, to activate/de-activate a cooling fan or circulation pumps, etc. when a certain event happens.
GPS08 Module
Thanks to GPS08 Module (included in the kit) and its software, you can immediately get lap times and all data needed for engine tuning as well as for improving driving technique.
Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.
TC Hub
Adds 4 K thermo-couples.
LCU-One Can
Wide band Lambda controller LCU-One, when used with Bosch LSU 4.9 probe, provides Air/Fuel data and lambda values and allows to perfectly tune fuel delivery.
SmartyCam HD Cameras
Connect on-board camera that overlays videos with the data sampled by your logger.